Skip to main content

Limit sign-in to your network's addresses

The IP allowlist lets members into Jaah only from the addresses you list, such as your office network or your VPN's exit address. A member anywhere else is refused. Your nodes and runners are never refused, so tasks keep running wherever their machines are. An empty list allows any address.

Who can do this: the Org Owner or Org Admin role. The IP allowlist card appears only while your plan includes it; without it, the card is not shown at all. See Check your plan and limits.

Add your ranges​

  1. In the sidebar, select Settings, then Features.
  2. Find the IP allowlist card, below SSO and SCIM. Type IP allowlist in Search settings to jump to it. If no card appears, your plan leaves the IP allowlist out.
  3. Read Your address: the address you are connected from now. If it isn't listed yet, select Add my address first. Saving a list without it would refuse you too.
  4. Select Add range for each network to admit. In Range, type one address or a range, such as 203.0.113.0/24. In Label, name it, such as Office; the label is for people only and changes nothing.
  5. Members who reach Jaah over your tailnet arrive from the subnet router's address: add that address too.
  6. Select Save. Rows with an empty Range are dropped. Saved. confirms it, and each saved row shows who changed it and when.
  7. Ask a member to sign in from inside your network and check they get in. From any other address they are refused.

Remove a range​

  1. Open the IP allowlist card as above.
  2. Select × at the end of the range's row.
  3. Select Save, or Discard to put back the saved list. Removing the last range lets everyone sign in from any address again.

If you locked everyone out, contact Jaah support: they can clear your organization's list.

How a sign-in is checked once the list holds a range: